Epson PowerLite 7500 Multimedia Projector "flashing green lamp light" Questions

...green light flashing,then orange,lamp light i just replace the lamp, and don't have any light coming from lens,starting green (after a few seconds,green become to flash), then turning on orange and ...

flashing green light i was using my projector and it was working fine and powered down fine. the next time i went to turn it on the on light turns green and so does the lamp light but after 10 seconds

...and the power light flashes green, with the temp and lamp lights flashing red. Before changing lamp use a canister of compressed air to remove dust specially inside the projector when lamp is

...green light flashing and then the lamp cover light flashes orange once. please could you send me the instructions as well to [email protected] My Sony VPL-VW100 has a problem turning on, that's ...

...green. After awhile the projectors lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red ...

lamp light blinks green again. 5-after about 7-8 repetitions of this process, the lamp light starts blinking red, and power light blinks green. Finally, both lights go red, and projector does a bit of

...green after being turned on, then it displays solid red under lamp. I have no light nor image. the lamp may not be striking. check the lamp for bulges and/or black spots inside. if there are, replace ...

...flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started out green begins to flash red. The ...

flashing, still won't turn on? I turn my projector on and the power light goes solid green. Then after a few green light blinks the LAMP WARNING light turns red and the power light flashes orange.

...green then it goes to a flashing orange light there should be a status for the lamp light; check to see if this one turns red. If it does count the consecutive blinks if it is 6 then replace the ...