Xerox Phaser 6140v_n Blk18/colour20 Pp - XEROX & VISIONEER - 6140V_N Laser Printer "remove stuck toner cartridge" Questions

remove it. It is stuck. Has anyone experienced the same problem? It is not a xerox cartridge btw. I am sorry I can not help you. I am having the same problem with a magenta cartridge (also non Xerox)I

stuck. - Reseat and verify movement of the toner cartridge sensor. It may be necessary to remove the flag and sand the pivot shaft and smooth to provide free movement. 2. Toner is packed in the sensor

...stuck in drum cavity. Think about what drum looks like is problem inboard or outboard as it sits in machine, and look at the cavity or if drum is in cartridge since I'm familiar with process but not ...

stuck inside on the plastic transfer belt. I carefully removed the label. But since then the color has gone haywire. Black text prints perfectly, but any color area on the paper gets totally distorted

...remove it-it definately is stuck somewhere in the front-was using the manual paperfeed when the problem happened. Looks like label stuck on the toner cartridge. Easiest solution would be to replace ...

...stuck in my Brother HL-2040 laser printer. I am unable to remove the toner cartridge to get the paper out; it seems to be stuck. What should I do? Thank you. I knew I had to take out the toner ...

...stuck trying to remove This is how to Install or replace the Toner Cartridge. Install or replace the toner cartridge while the printer is on (if the power is not on, the cartridge carrier does not ...

stuck. Any help very much appreciated! My co-worker managed to get the UPC drum back in by prodding the toner cartridge (which was too close and thus blocking the UPC drum) slightly to the side. After

...cartridge is stuck in the loader and will not come out. How do you remove the toner cartridge? push the blue plate/handle thingy located on the right side of the toner cartridge and push to the

top( Whether smooth operation or stuck) if it stuck then apply little lubricant . "Toner not instaled" Error 1. Switch off the printer 2. Remove the cartridge and put it back 3. Then try again........