Rockford Fosgate T10001BD- Car Audio 500watts Mono Power Amplifier Car Audio Amplifier "wiring amp power" Questions

...amp will only power up when the head unit is on. 4 Remember to run the signal (speaker) wires in a chase separated from the amps power wires, so as to avoid a buzzing noise in the speakers. 5. Always ...

...amp power. If you're buying a power wire kit, it most likely won't have a separate distribution block for the ground wire (usually they have separate ground wire for each amp or one piece that's long ...

wiring on the crunch 520.5 need to know the gage for power Hello, I would go with some good 8 gauge. More than that for this amp would be overkill and a waste. Many people thing thicker wire is better

...power to keep the amp on. Also check your ground wire. okay i had this same problem. i checked the 12V wire, it had power going through it. i checked the remote wire, it had power going through it ...

...with extra, power,rem,ground, so you can , power up another Amp Without runing to many wires. , or using a power block.like a parallel, being your 1st Amp your power block, and your remote, ground

...amp power and same thing as the ground and get NO power you have to run a seperate power wire from ur battery 2 ur amp and the same 4 ur ground wire You can run your amp.remote wire to your stereo ...

...amp has no power the sony amp i got has no power running to it i cheched all the power wires and there good i also looked at all the fuses and there in perfect condition is there a power light on the ...

...amp kit with 8 gauge power wire. Is this the right thing to do??? i am really confused. You should go with a 4 guage power wire kit. If your amp is going in and out at high volume than that is your ...

...Amp. I need car wiring instructions for a single sub woofer and how to wire up the remote power on/off. What is the required in line fuse? The inline fuse goes on the power wire (as close to battery ...

...Amp power contact can blow the internal power adapter. Before deciding if to replace or repair the amp, check if it has an external fuse mounted at the back side of the amp. In that case replace it. ...