...signal was weak (720x480) instead of the hi-res signal. screen shows signal for about 3 secs and then goes black. i tried other hdmi inputs and video works fine, but no audio because i am using an ...
Question about Protron Televison & Video
...Weak or no signal digital coax when hdmi dvd player on I have a Samsung LN46A630 and I normally use it to watch tv through a coax antenna. Normally all channels (digital and analog) show just fine. ...
...weak signal when I turn the tv on. JVC RM-C18G It has to be on the right channel. If you are supposed to be on channel 3, 61, 73, 113 (ask the satellite company which one you should be on) then ...
...signal is too weak to give an acceptable picture hdmi splitter could do that, ...
...weak signal. I tried resetting the TV in self check mode and it did not help. It does appear the back was removed at some point. Any ideas?? your hdmi is not connected tight or the cable is bad,or it ...
...that problem and I had to set the HDMI to a lower setting on the ps3. Also remember that all HDMI cables are not equal. If that cable is longer than 20 feet then you could have a weak signal
...weak signal" flashes on screen at different places and do not receive a picture. seems like you are using an "off the air antenna" that receives weak signal, you may be too far from the station, go ...
...weak or no signal. If you go to the TV setup, the HDMI option is greyed out. If there is something with the setup for the DTV unit, how do you handle that when the TV is getting no signal? Ideas? You ...
...Weak or No Signal" is displayed. It is not our ariel so it has to be the TV, can you assist at all? Hi, you have a faulty HDMI cable which is causing the "weak or No Signal" to display.. Replace ...
906 questions posted
Usually answered in minutes!
269 Questions
153 Questions
160 Questions
144 Questions
106 Questions
