Protron PLTV-32 Television "clear tech tv remote controls" Questions

clear of obstacles. Hi, It could be either remote is bad or remote sensor located at tv front is not working. You can test remote with help of any digital camera, watch remote front through camera and

clear TV button until all lights light up at top of the remote. 2. Punch in the 3 digit code 3. Press the pound (#) button below the number 9 on the numeric keypad 4. Try the volume and to turn the tv

...clear TV button until all lights light up at the top of the remote 2. Punch in the 3-digit code 3. Press the pound (#) button under the number 9 on the numeric keypad 4. Try the volume and powering ...

...clear? I HAVE THESAME ISSUE AND MODEL TV.. ITS THE DAMN BOARD UNDER THE COVER.. IM A TECH..THERESA SMALL IC NEAR THE CABLE THAT CONNECTS TO THE CONTROL PANEL.. IT BURNT OUT!!! SO U HAVE 2 REPLACE THE ...

tech savvy ones!) It may also be worth looking for a simplified universal remote control with clear buttons. There is one which has large buttons but the controller is almost the size of a sheet of A4

remote to the TV, which seems to be fine. I would really like to be able to change channels. Somehow it got stuck on CSPAN Did you ever figure it out? I have the same problem and Ive talked to 3 techs

...Tech Support and it totally worked when the other ideas on this site didn't. "I recommend clearing the TV memory, resetting the settings and re-running the scan. To perform this please remove the ...

tech knowledge, so any help is appreciated! It's not the fuse. Fuses have two states: sound and blown. If it was blown you wouldn't get any power. More likely a capacitor is swollen or leaking on your

tv turns itself off and is in this state, the remote control has no effect and the power button on the tv has no effect. The only short-term fix I've found is to unplug the tv and plug it back in. I'm