Rockford Fosgate Punch 601S Car Audio Amplifier "check polarity speaker" Questions

...polarity ( all + to + and all - to - make sure that the speakers u have connected are not below the amplifier manufacturer specs and that that they all have the same OHM load (check back of speakers ...

polarity and so be cautious. next you can connect the sub woofer from the left and right channel as the amp is bridgeable. Use the lead to connect from the R- positve to L negative. test and check the

...everything... amp light does come on for power so is not the power source... any ideas??? check the polarity for all the spk do them one by one with the amp powered up and make rca not crimp any ...

...Check if you have a subwoofer output from your head unit (most later models have). If there is, you might not need an active crossover anymore, but it depends on how you like the sound quality of the ...

it wasnt putting out any bass i could touch my sub and barly feal a vibration assuming that the input is not the problem did you check to make sure that the polarity of the speakers is wired correctly

polarity issues. Check for shorts on the speaker wires make sure the wires for power are ok. TWO REASONS ONE IS THERE IS A SHORT PROBABLY TO GROUND IN THE WIRING. TWO THE RATING OF THE AMP COMPARED TO

...the other is touching a metal part on the amplifier, there is a rumbling in the subs. You should check and verify first the output signal in the amplifiers by using a multimeter on the db range, ...

...Amplifier how much will it cost to fix it, it keeps blowing fuses every time i turn on my car, i checked the power and ground terminals making sure theyre not touching i made sure the polarity was ...

...Check speaker polarity with a AA battery(Speaker pops out when polarity is correct) Make sure the speaker crossovers are working properly. Check your ohm load when you connect the speakers together ...

check to see if all the speaker connections are in polarity ( all + to + connections and all - to - connections in their corresponding places) also you could check to see if the speaker cables are not