Question about Vacuums
Why does my steam blaster cause my electricity to cut out as soon as i try to put the plug in What should the layout of the wires look like at the bottom of the steam blaster what are the loads on the
simac evt 100 steam cleaner Water heating, pressure building, but no steam from nozzle. Try taking the steam head apart and cleaning. If difficult to remove, fill a basin with white vinegar & a ...
Question about Euro-Pro Vacuums
my Shark hand held steam cleaner sc 505 is not building up pressure, steam is leaking from lid When the pressure is building up near to completion steam is coming out from the lid although screwed on ...
...you are picking up from your floor is so small that it is going through the filter and dust cup and building up in your vacuum motor. When enough build up collects, then it starts to blow it out the ...
Question about Dyson Vacuums
...check your belt. Is it broken? Then if that's not broken, check the ends of your beater bar for a build up of hair, string, etc. This build up will stop your beater brush from working. If you can ...
what is clr?/ clorox CLR is a product that clears rust and hard water build up out of shower heads and off sinks and tubs etc. I believe you mean CLR which is a special cleanser. The capital letters ...
...spray? run clear water through the system after each use, as for your problem,, lime deposits build up when left idle and not rinsed, you can run any household lime remover through the unit
Question about Vacuums
The mop makes steam, but when it builds up, it makes the mop head explode off. There is white crusty looking material inside the mop head and on the end where the steam comes from the housing of the ...
...etc however it won't **** up much throught the hose attachment, there is no obvious blockage or build up of fluff etc You should check the hose. Try and see if you can see the light on the other ...
5 questions posted
Usually answered in minutes!
151 Questions
65 Questions
59 Questions
44 Questions