Mitsubishi WD-82738 DLP TV "shut down green" Questions

...green while cooling down then I can restart. this may happen 4 or 5 times in a row. Any suggestions Once the set shuts down, wait for the unit to stop blinking. Once it stops hold in the input and ...

...shut itself off anywhere from 5minutes to 6 hrs of great operation then the blinking green light appears. I have to unplug wait then plug it back in wait 60seconds till it stops blinking green and ...

TV Shuts down Mitsubishi WD-52525 comes on and then green lights starts flashing and tv shuts down. If you wait tv will turn on again but problem happens again convergence amp IC's i would start with.

...down and the same time and the green light its going to blink a segment of times i could be green x3 times then green 2x stop , then will repeat the sequence 5 times ,just as an example the bkinking ...

...shut down. When we try to turn it back on, the green timer button blinks a couples times (u can hear clicking in the back of the tv) and then the green timer button flashes 3-4 times, then the tv ...

...down The green light should only blink if set has been unplugged---upon plugging it back it will blink for about 70 seconds and go out----this is the set booting up and is normal.At that point you ...

shut down, without pressing reset: press and hold both the Device (Input) and Menu buttons on the front panel until the green light starts flashing. It will flash a two digit code: 3-4, 3-8, 5-7, etc.

...A SOUND LIKE A CRICKET , THEN GREEN LIGHT GOES OUT AND THE RED LAMP LIGHT COMES ON. WHILE YESTERDAY IT WORKED BUT SCREEN STARTED GETTING DARKER THEN SHUT ITS SELF DOWN Lamp is defective..replace

...was like scrambeld cable screen went green then blue then off bulbs are not cheap 2004 mits.wd-62525 not bulb component is damaged in power supply serction shutting down to protect other ...

...green light. I power it down...wait a few minutes and turn it back on. The amber light remains on and the green light comes on, I have sound with no picture. Then I power it down for a few minutes ...