NO PICTURE ON SCREEN PLV 16190 My picture went out but I was still able to here the audio. I unplugged my tv and plugged it back in and it worked. If this problem is similar to yours and you have not ...
Question about LG Televison & Video
...have legends printed on the board and found near the connectors. With a multimeter, you should be able to verify the
Protron 37 Hi Jaime, please explain to me what the power supply is and will I be able to explain this when I bring it in to be fixed? The power supply is the circuit board that helps the LCD to turn ...
...but no sound Television was working fine until it took a power surge. Since then, I have not been able to get the sound to work. Check its speaker. If they are OK, check and replace damaged ...
Question about LG Televison & Video
...circuit card/installed it and the unit works perfectly. They even directed me to various sites to purchase the circuit board needed. If I recall correctly, it was less that 100.00 and very easy to ...
not able to switch on - red light flashing constantly some start up circuits problem occur in your tv, or the IR remote control not working.
...is possible there is a loose connection on the input circuit board area, or a cold solder (if assessable on the board to be serviced). It is also possible the input controller circuit has failed in ...
Question about Dynex Televison & Video
...works fine on HDMI. Could this be a TV card issue? talk with a tv repair shop to get a better idea but I suspect that it is a conflict between the coax cable and the hdmi circuits ( not being able to ...
...it is a bit older. any local repair shop, best buy (call, dont bring into the store), would be able to repair the
...then it is likely a BACKLIGHT problem. Shine a flashlight very close to the screen and you may be able to glimpse the tv picture playing very dimly on the screen. Most likely you have some BULGING
99 questions posted
Usually answered in minutes!
1,646 Questions
482 Questions
435 Questions
431 Questions
403 Questions