Sherwood RX-4103 Receiver "connect turntable amp" Questions

...Yes, you'll need to purchase a PHONO PRE-AMP, and then connect the turntable to the pre-amp, and the pre-amp to the LINE INPUT of your receiver. - OPTiC Turntable Repair Expert Digital Analog ...

...connect a turntable to my Sony mhc nx3av system which I got 12/13 years ago and it is great. Will it be accessed via the MD option? And must I get a turntable with a pre-amp? Thanks in advance. John ...

...connect an analog turntable to my Pioneer VSX-D710S? Also, do I need a turntable with a built in pre-amp? Pioneer VSX-D710S and turntable? According to the specs there aren't any phono inputs which ...

...turntable to an Adcom GTP-400 pre-amp, which worked for a while but then the sound quality deteriorated and now I have no sound at all from my turntable! All of my other devices (DVD, VCR, CD, ...

...connect the turntable directly to the phono jacks on the the receiver???? No, you don't need a preamp if your turntable has a moving-magnet (MM) cartridge, it should work as-is! Happy vinyling =] See ...

...amp on turntable i have a pioneerpl200 turntable and have it connected to a yamaha mixing desk via rca to 1/4 jacks and there is a distinct lack of power in the signal .ive tried putting it into an ...

...connect a turntable connected to a yamaha a450 stereo amplifier...can I attache the a450 to the htr-6130 ? I have a turntable connected to a Yamaha A450 stereo amplifier and I want to know if I can ...

...connect my turntable to the phone input, the volume is incredibly weak. I am using an MM cartridge. Will I need a preamp when using the phono input? What settings would be optimal? is the turntable a ...

...connect a turntable to the AVR132? Do I require a phono preamp - if so where does this connect into the receiver? Most amps / receivers that lack an input specifically labeled "Phono" will require a ...

...Turntable cant connect to cd or aux. Only phono. Also check to see if there is dust and dirt built up on the needle. clean if needed. most likely a grounding issue Do as the first answer states. Make ...