Tascam DA-30MKII "belt" Questions

...clicking sound ( about 2 per second ) on analogue or digital out. Any ideas? HI... There are 2 belts in the mechanism that would need replacing. I've fixed 2 of these. There's a very small belt ...

VHS TAPE FF/RW REAL SLOW AND SQUEAKS AND STOPS DURING PLAYBACK It sounds as though the drive mechanism needs to be overhauled. This can entail replacing belts or drive wheels, depending on the model. ...

HI I REQUIRE A BELT FOR A PIONEER PL112D RECORD DECK CAN ANYONE HELP Best bet is to contact PRB they are a supplier for hard to find belts of all types.

...Looking at the bottom of the transport, there's a small, -no, make that tiny- black rubber drive belt which goed from a very small pulley to a rather larger pulley directly next to it... That's

...thank,s again! scott. albany oregon. Hi ferris, Are you talking about a wheel or a belt? If it is a belt you can go to a vacuum cleaner shop and match one up( make it just a little ...

...model and needs care in maintenance. Good Luck. It sounds like you may have blown your threading belt. Pull the lid off and have a look at the small threading motor at the back left side when ...

...have the cover pulled off and the tape drive mechanism unfastened , turned over and,the VERY small belt needs to be replaced SBO1.55 belt from ...

I am looking for drive belts for the turn table and the 2 cassette units on an MX2001 Music Centre All you need do is measure the diameter of the cassette belts and put them in google. If say it's ...

...is simply bad soldering and easily fixed. Not to certain on the door, but it might be a drive belt that is lose or broken, or maybe more bad

...allows the eject button to be depressed. With my unit the actual problem was a broken rubber drive belt. Your problem may be different. You can tell by looking if it is the belt. It is possible to ...