Tascam 2488 Portastudio Multitrack Recorder System "stereo fader" Questions

...(upper right) make sure your monitoring source is set to 'stereo'. Then make sure your 'monitor level' control is turned up. The 'stereo' fader (sub mix fader on the MKI, stereo fader on the

...bus in the LCD screen when using the mic even if the input isn't yet assigned to a track (and hear it assuming your monitors or stereo system is set up already and the master fader is turned

...L and R outputs. Then just assign those inputs to two adjacent channels (tracks) or one of the stereo pairs, turn up the input levels for those inputs and the faders for those tracks and you'll ...

tascam 2488 channel faders 1-5 are linked to channel 8. Not stereo linked. updated software, gone through manual dvd etc. can you help please. Link to Tascam 2488 documents page: ...

...stereo set of tracks out eff 1 and send the other track out eff 2). Pre, post or off will determine whether the fader affects the signal being sent or not and the loop setting on the top of this ...

...stereo mastering tracks (left and right). Master recording will automatically stop at the 'out point'. You can redo the master, undo a master, or copy the master tracks to any other two available ...

...fader down. the noise is only heard in the left of the stereo output (or in the left ear of headphones), and the eq controls have no effect on it. any help would be greatly appreciated! try it with ...

...fader making working with stereo easier. Channels 1 and 2, 3 and 4, 4 and 6, ...11 and 12 can also be linked as stereo pairs and will be controlled with the fader of the odd numbered (first) track ...