Brother MFC 1950MC Printer "getting print head center" Questions

then it is the printer, and the problem could be a print head, or contamination of a paper path component, check smudges of on drive rollers and guides. Don't understand why it would be the purge unit

...print head should be part of the inkjet cartridge. Did you not use the printer for a while? In that case, the cartridges may have just dried out. The price he quoted you sounds a bit high, but not ...

print head was getting kind of stuck on the right side. First, I cleaned the tracts, metal and plastic parts that come with contact with the print head. Then, I lubricated these parts using WD-40. A Q

...print head. (3) Use cotton swabs dipped in hot water or a mix of hot water and isopropyl alcohol to thoroughly clean the print head. (4) Repeat this until there is no ink residue coming off on the ...

...print head. These absorbers can control enough ink for the expected life of the machine.Below are the explanations of how ink is processed into the ink absorber box.The Brother machine will ...

...print head to ensure you?re getting the best from your printer. A dirty or clogged print head will hinder a regular flow of ink from the ink cartridge to paper. The first step is actually knowing ...

...is showing CHANGE UNABLE 51. I dont have the user manual anymore. How do I get it working normally again?? ERROR 51 MEANS THAT YOU NEED A NEW PRINT HEAD.YOU MUST CONTACT YOUR BROTHER SERVICE ...

...print head and 4 new cartridges to prime it with. Call Brother and raise hell! there have a been a huge amount of these head failures! a new head costs around $100.00 but if you press brother will ...

...getting is blank pages of paper. On your printer take a look on the "ink management button"press it then look for cleaning using the arrows up and down then press ok or set or what ever the command ...

...getting the ink empty error message for cyan and yellow. I have removed and reinstalled atleast 20 times, unplugged the unit etc. etc. and I am still receiving the error message. Is there anything ...