InFocus LP530V Video Projector 2000 ANSI Lumens 6.6 lbs. DLP 4:3 XGA 400:1 (LP-530V, LP 530V) Multimedia Projector "350" Questions

...remember my password key for my Sony VPL-ES7 projector. Please help me We possess a Garcinia Elite 350 much greater risk today, with the polution in atmosphere and water and preservatives in on the ...

...guessed. Send me your mailing address and I will send you an infrared thermometer. You saved me $350! You're welcome, glad to hear it! Shoot me an email and I'll send the info: qbutcher at gmail ...

...or lamp is not defective measure the connection volts from the mother board to the ballast (NOT THE 350-400 VOLTS FROM THE MAIN SUPPLY RAIL) this will then confirm it may be an over sensitive ...

...to be fixed. It will take 6-8 weeks to get fixed because the parts are in short supply. Cost me $350 to get a shop to fix

Cannot Reset Infocus LP 350 Projector after replacing a bad lamp Hi, I have (2) Infocus LP 350 projectors. The bulb was burned out on the first one when I got it on E-bay. I have replaced the bad lamp

...and install it ourselves? The bulbs are about $150-200 and with assembly is about $350.how difficult is installation process? http://www.lumenarc.co.uk Yes you can. The projector ...

...bulb would not light. The square glass lens in front of the bulb had splintered! The bulb was only 350 hours old. I replaced it and now I get the same behavoir, intermittently it works fine. Most of ...

an extra 600 hours... I have changed bulbs gotten 1000 or so hours from new bulb. New lamp cost me $350, lamp driver cost me $120. Then I read on a page to try and flip it right side up, because I had

in3114 dead pixels You should change the DMD or the optical engine. DMD abouut $350 Engine about $650 P5X84-2200 OPTICAL ENGINE, IN3116

connect a acc5d to mcs 350 Pls help me my fb pass. None because i forgot my passworrd