Question about Brother MFC Office Equipment & Supplies
fax machine MFC 7420 keeps saying that the back door is open when it is not - its fully closed. I've turned the fax on and off and and plugged it out but still to no avail This Error Is Reoccurring On
Question about Brother MFC Office Equipment & Supplies
...back cover.not working. i cannot get no service of fax,printing and copying. You need to clean the scanner glass where your original feeds into the fax.Sounds as if the sensor for the rear door is ...
Question about Brother MFC Office Equipment & Supplies
...fax and scanner machine) says << back cover open. close back cover>> but the back cover (or at least what i think is the back cover) is closed. I even opened and closed it again but the ...
Question about Brother MFC Office Equipment & Supplies
...your fax machine, wait few seconds, replug. Open the toner door, take out the unit, put it back in. Restart the computer. One of the above should work. It helps me. Check your printing icon as
Question about Brother MFC Office Equipment & Supplies
...fax and scanner. I discovered that envelopes wrinkle because users, like me, didn't know that Brothers built in a no-wrinkle, pass through exit for envelopes, labels and thick paper. Envelopes were ...
Question about Brother MFC Office Equipment & Supplies
...machine will feed paper only from that tray. If the selected tray is out of paper, a "No Paper" message will appear on the LCD. You need to reload paper in that tray.To set the Tray Use setting, ...
Question about Brother MFC Office Equipment & Supplies
...machine up on its back. Find the lever right next to the paper feed roller, and make sure it swings freely. If it can't get out of the way of a sheet of paper going around the curve of the paper ...
Question about Brother MFC Office Equipment & Supplies
...fax machine 3300 mfp Error message on the xerox phaser 3300mfpv/x fax machine says the fuser door is open. Where is the fuser door? The fuser door is at the back of the machine. Open the door, pull ...
...machine it allow me to make one copy then the error come back again. I open the side door to check for paper but i's all clear. It might be due to sensor faulty. Perform following input ...
Question about Gestetner Office Equipment & Supplies
...the toner botle in the cartridge and push it back in to the machine and push down the green lever,close the front door and the the side door.your machine should load toner to the pcu now.Good ...
139 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions