Question about Brother MFC Office Equipment & Supplies
having constant paper jams - the paper does feed and the document prints about 3/4 of the page, but crinkles up before exiting the printer, like the slit where the paper is supposed to come out after ...
...locate the first roller in the paper path and, if possible, remove it and using a coarse wood file, roughen the roller. Depending on the type of rubber, this can produce tiny 'fingers' of rubber ...
...on the web. I called my grandson, who used to work on printers, and he suggested using sandpaper to roughen up the feed rollers (two on the right side when facing the printer.. a large and a small). ...
...it no longer grabs the paper. If you ahve some emery cloth try to rub it gently on all rollers to roughen them up a
transport the paper. You MIGHT be able to lightly sand the rubber rollers with sanpaper to slightly roughen them
Question about Brother MFC Office Equipment & Supplies
...FRESH SHEET A4 FOR ROLLERS TO GRASP.IT CLEARED MY BLOCKAGE. TRY SLIGHTLY CRINCLING THE PAPER TO ROUGHEN IT UP IT MAY PUSH BLOCKED PAPER ...
Question about Brother MFC Office Equipment & Supplies
...smooth and shiny from ink. Clean both the paper guides and the platten with alcohol. you can even roughen them up slightly by using a plastic pot mit. Do not scrub just light rub to remove some of ...
...the rollers with some soap and water. Make sure the power is off first. use a flat screwdriver to roughen up the piece of cork that is at the back of your paper
...right hand corner of the paper and jams. clean the roller with alcohol and use a plastic scourer to roughen lightly the rollers and the ...
Question about Brother MFC Office Equipment & Supplies
...in a jamb. Use alcohol to remove ink shine. You can even gently rub with a plastic scourer to roughen the rollers a ;little . not too much but enough to give it better grip on the ...
223 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions