Brother MFC-7220 All-In-One Laser Printer "drum unit error message" Questions

drum unit, but leave the cover open. You should get the message "replace drum unit".....YES | NO? press "1" to reset. after it says "accepted", close cover. Please rate me :) I left the cover open and

...drum unit. The drum unit is installed. We've turned the machine on and off but the error message comes back. How do we fix it?? remove the yellow plastic from the toner thats a protection. check ...

DRUM UNIT..HELP Hi there, Below are instructions that I have found from the internet. Hope that they will help. Open the front cover of the printer. Hold down the Go button for 4 seconds until all the

...Menu > Machine Info. > Reset Menu. Press the Up or Down Arrow key to choose Drum. Press OK. Press 1 to reset the drum unit counter. Press Stop/Exit. Hope it helps. Thank you for using

...Drum unit. Check for a seized opc drum. i can not make copy & i can not scan my document, cause when i do this it says clear the scanner jam, and then press ok please help me i realy like my ...

drum unit. Open the front door and pull out the Drum unit. Look on top of it for a small (usually) blue slider, sitting in a 10mm slot that runs the length of the Drum unit. This is the corona cleaner

...drum unit. What is wrong? The error means there is an issue with the black/yellow drum drive motor. Try taking out the drum unit and first see if anything broken within the drum unit. If drum unit ...

...drum unit. Follow the below link to fix Print unable 32 error message on Brother MFC-9840CDW Laser Printer http://tinyurl.com/print32 All the Best... You have to find a new printer I just had this ...

...drum unit, remove toner unit. Remove paper tray. Spray compressed air in all parts of the drum (all parts. Very important). Do the same with toner unit. Do the same inside printer. Be sure everything ...

...drum unit in January 2010. Any other ideas? The guy that replied solved the problem. He rocks and I can't believe that brother does have a large posting on this issue. Sham on them: ben2913 did ...