...clean the ink before pressing it through the nozzels onto the paper. That is the main reason why some ink chanels will clog. You cant open the printhead to clean the filter. Drop some ink into normal ...
Question about Brother MFC Office Equipment & Supplies
ink cart and do the cleaning twice. there should be magenta again. If there is no magenta after that, this could be either because of air in the system (thats why you should do the cleaning twice!) or
...ink destroys the nozzels due to a chemical reaction! If you re lucky you will have good results when useing original brother ink carts. Run the cleaning procedure twice after you have inserted the ...
...water to get the ink to dissolve from the nozzels. It should print after that. just make sure the head is clean and dry before placing it back into the printer. let me know how you get along with
Question about Brother MFC Office Equipment & Supplies
...BTW: Do use only DYE ink for all brother printers! The pigment ink will clogg the micro filter infront of the nozzels. When running machine with generic ink print a quality test sheet once a
...the printhead. Remove these and the printhead should pop out. Clean the nozzels (the little parts that squirt out ink) and reassemble. If this doesn't work, then you'll have to replace the
...ink out of the tube and nozzels. If you have them at the right places print a test print by pressing ink button and selecting the test print. Does it look good or do still have the diffrent colors? ...
Question about Brother MFC Office Equipment & Supplies
clogged and cant be fixed anymore (because of wrong ink: pigmented ink will clogg the filter infront of the nozzels; use ONLY dye-ink for all colors!) leaving the maintenance mode by pressing 9 then 9
...ink cause the printer head to clog. Is there maximum no of cleaning that can be done? jay, close to the facts: never(!!!!) clean a brother printhead by soaking it into a solution what so ever it ...
Question about Brother MFC Office Equipment & Supplies
...ink that was used in the refilled cartridges was probably to thick for the nozzels on the head, you can try buying the original cartridges and then cleaning again, or check with the store you got ...
68 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions