...reset the counter on HL-5240. How is this done? Drum reset procedure on this model is quite simple. Just open front door, hold down the GO button until all lights are on, let go of button then close ...
Question about Brother HL Office Equipment & Supplies
reset the printer.. Then replug the printer.. and download the latest driver of the printer from the following link.. Brother Solutions Center HL 5240 United States Just search for your model number..
Question about Brother HL Office Equipment & Supplies
...5240 laser printer Toner light comes on I have replaced toner powder & light still comes on obviously printer will not print any documents. Is there any reset that has to be done once you replace ...
Question about Brother HL Office Equipment & Supplies
...5240 Out with the old and in with the new, you remove the toner and drum together, remove the toner from the old drum by pressing the blue lever on the side, install the toner in the new drum, and re ...
...reset procedure: Open toner door, hold down go button until all lights are on, let go of button, close door, push go button. Will reset drum counter to 100%. Good Luck and Thank You for using Fixya. ...
...5240 drum light flashing Hi Drum light was flashing on this printer, so I replaced the drum for another(original Brother DR-3100). Followed steps to reset the Drum counter. However when I close the ...
...5240) and I replaced the drum with a new one and it still will not work... Any suggestions? I continued looking and found where someone else had the same problem. I opened the front cover, held down ...
wont print, paper light flashing put fresh paper in, and mak sure it is not rammed in, then hit the reset button. all els fails unplug machine from everything then let set for 10 seconds, then plug it
...reset the drum counter. with the front cover open, push and hold the control panel button until all the lights come on. Then release and close the front cover of the printer. This is unlikely to ...
...the toner and now the light will not go off and I can only print 3 sheets at a time. I tried to reset it like we do with the drum, but the toner light will still not stop blinking. Please help ...
553 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
377 Questions
249 Questions
188 Questions