Brother HL 1440 Laser Printer "picking paper bottom tray" Questions

...paper tray, you can pull out from bottom, or if too far into, you should be able to open the back and pull out. If it often picks up 2 sheets, go to a lighter type of paper, and if this is the first ...

The paper will not feed from the bottom tray and the red error light is on continous clean the pick up, check the gears.

...paper and the bottom part. so if this is the old settings : |paper| --> you want to make it: | paper| so you can have slide the paper back and forth. DON'T adjust the setting to the next paper size ...

...paper at all, despite the wheels at the bottom(side)were rolling. 1- either the tray is not lifting the paper to meet the rollers ( which may indicate a motor problem) or the rollers are not coming ...

...paper feeder roller might have reduced in size to sense and picking the papers from the tray. Test run can be done by printing in the open tray (which is available on the top.. If it is able to pick ...

...picking up paper. If OK, take out paper tray and set on a table, the gear closest to the table has a flat area that needs to be level with the bottom of the tray or the table. If slanted up you need ...

...paper at the bottom Try to put paper in the manual feedd tray. If it prints, then put more paper in the auto-load tray, if that doesn't work, check the EXACT location of the clips and position ...

...paper loaded in the bottom Printers with photo tray have a nominal input tray capacity of 10 mm, or 100 sheets of plain paper. If the tray is loaded above its normal capacity, the printers will not ...

...bottom) it cant feed paper from main tray , it try to pick up a paper but don't , how can i fix the problem? check your takeup roller if the rubber is cracked and oxidized get a replacement as it ...

paper from the bottom tray). It works fine from tray 1, the front tray. I've replaced the separation pad in the drawer and the pick up roller for it that is underneath the unit. I can't figure out why