Brother HL 1440 Laser Printer "mean lights blink" Questions

...lights are blinking. Does this mean I need to replace toner soon? Generally if both the (red) alarm LED and the (yellow) data LED are both blinking, it is an indication that the tone cartridge needs ...

drum light blinking The light blinking means it's almost used up, when it comes on solid it will stop printing. If your prints still look good you can open the front door and hold the go button til ...

won't print. blinking red paper light flashing I cannot print anything. I have a blinking red light flashing under paper on my brother hl-2040 laser printer. This usually means your printer is out of ...

blink. The drum light is on due to a preset counter to notify you that the drum has reached the end of Normal Usage life expectancy. It doesn't mean that it has failed, yet...but soon. I would suggest

lights Blink alternating in about 2 sec intervals. currently, the error you have is not a service errorl, ready and alarm blink means that you have either a paper jam, no paper, or a paper misfeed. do

...lights mean that the toner cartridge is empty. When you replace the toner, be sure to slide the corona wire cleaner across and back. This is the small light blue plastic piece on top of the drum ...

toner what needs to be done when toner light comes on? when the toner light comes in and the status is red, it usually indicates that the toner is about to be empty or is empty. if status is green and

Alarm light is RED and data light is AMBER - both are on permanently Alarm light is RED and data light is AMBER and both are on permanently. Printer will not do anything. This means toner is empty. ...

paper light keeps blinking, paper full, won't print Paper light blinking could mean a few things on this machine. There could be a paper jam in the machine. Open the front cover remove the drum and ...

...mean the drum is bad. Are there other lights on and are they solid or blinking? May be a fatal service error with a secondary error that can be gotten by pressing a button while the first error is ...