...changed the toner, unpluged the printer,turned it on and off and there is no paper jam. Hi, it sounds like you need to change the drum. If you are using the High Yield TN660 toner is your printer, ...
Question about Brother HL Office Equipment & Supplies
my brother HL-5240 toner light blinks , what is the problem ? You need to change the Toner Module, it is.has run out of Toner, that's used to print out.
Question about Brother HL Office Equipment & Supplies
...changed out the toner & drum to a new set. Turned it off for ~ an hour. Toner light still blinks. Thanks for your help. f the Drum LED is still lit after replacing the drum unit, the Drum counter may ...
...changed the cartridge please help us The HL-2070N gets jammed in a toner end-of-life error condition. Perform the following to clear (I have 120 in the field so I know it works!): With paper loaded, ...
...light is blinking and not sure how to change it or fix it in Brother HL-5250DN Hit the purple/blue button on the top of the printer 3 times. This will print a settings report of the printer showing ...
Question about Brother HL Office Equipment & Supplies
...changed toner still wont work. Hi. My Brother 5240 laser printer Toner light comes on I have replaced toner powder & light still comes on obviously printer will not print any documents. Is there any ...
...Changed drum & toner. All lights or off exempt green/go light. motor runs high as it would if drum was needed. Wont print though. I think the previous post applies to resetting the drum light after ...
Question about Brother HL Office Equipment & Supplies
4 streaks down the front of every page. Changed drum, changed toner, drum light is still blinking. Did you try cleaning the corona wire or the glass? Do it with a clean tissue dipped into alcohol.
553 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
377 Questions
249 Questions
188 Questions