Question about Brother MFC Office Equipment & Supplies
...ink cartridges. Soak a clean, lint free cloth, in as warm a water as you can stand. The warm water helps to dissolve old dried ink. Wring the cloth out until it is damp, NO drips. You should be able ...
Question about Brother MFC Office Equipment & Supplies
...of time they geet covered in ink this will not allow the cartridge to print properly and cause headaches clean with a baby wipe or a paper towel with soap on it dry thuoly with hair dryer and try ...
...the area and clean up the ink with alcohol swabs until clean! Also clean with alcohol, the contact points and surrounding area. Reinsert the ink and try and see if the printer recognizes new
...ink on the cloth, go to a clean place, and wipe again. Once, you are satisfied these areas with the holes are clean, leave the printer open, and the ink cartridge sitting out. You may want to use a ...
Question about Brother MFC Office Equipment & Supplies
clean it's ink channel using cleaner or steep in water (do not touch circuit pin area with water) 20 minutes or longer. then set back and test (you can do more times), still not fixed, your print head
Question about Brother MFC Office Equipment & Supplies
ink got into the spongy pads. I've used rubbing alcohol to clean, plus a towel to soak up, but what do i do next? there has to be a way to replace the spongey things, or will the ink just dry and I'll
ink cartridge and put it's surface of bottom (just touch ) in the clean water 1 Hr, then set back and test it. still not fixed, you also need to do same thing if your print head is separated from your
...ink cartridge) 2) the cartridge ink channel dryer and constipated, take out the cartridge put the bottom surface touch down clean water (a little) 1 hr, then set back if the cartridge has enough
...ink cartridge holes are clean, set the cartridge aside. Now with a clean, fresh surface, wipe the area on the printer where the ink cartridge meets. You may want to follow up with a clean, lint free ...
ink collecting under the carrier and how do I clean it out? You correct about the collector but you can empty it as well. With the printer unplugged. Move the carriage to the left manually. Here comes
496 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
381 Questions