...reset the drum error message for Brother MFC-9940CN: Turn the the machine's power switch back on. Press Menu > Machine Info. > Reset Menu. Press the Up or Down Arrow key to choose Drum. ...
Question about Brother MFC Office Equipment & Supplies
...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...
reset the drum...I have printed a lot of copies but very small amount of actual print. To reset MFC-7840W drum count use the following steps. 1. open the front cover (leave open). 2. Press clear/back.
Question about Brother MFC Office Equipment & Supplies
Reset the drum counter on Brother MFC-9840CDW The drum unit was replaced because of immovable marks on one of the drums, not because it had exhausted its lifespan. I followed the instructions (Menu, 8
Question about Brother MFC Office Equipment & Supplies
...reset the Change Drum Soon on the display? I put in a new drum and the display is still saying ?Change drum soon?. How do I reset it? All you should have to do is: -replace the old drum with the new ...
Question about Brother MFC Office Equipment & Supplies
...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...
...drum unit".....YES | NO? press "1" to reset. after it says "accepted", close cover. Please rate me :) I left the cover open and pressed the option button. At that time I received the message, replace ...
Question about Brother MFC Office Equipment & Supplies
...reset the drum unit count. To do so: Press the Menu button, and then enter the number 84 to access the Reset Menu. Press the scroll keys until Drum is displayed and press OK. Drum unit will ...
...reset drum error message These machines need to have their drum units replaced every 12000 pages. If you have replaced it then it needs to have the machine reset. Normally the instructions are ...
Question about Brother MFC Office Equipment & Supplies
...reset it your new drum should have had a plastic "starter sheet" installed just level with the exit hole. this sheet resets the counter, and should not be removed before fitting the new drum. The ...
36 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions