...door is open and it isnt. Also the printing keeps folding up inside and jamming the drum as well first check and make sure that the back diir sensor is in place next if the paper is not going all the ...
...fuser door goes into a small hole as that's going to be the sensor to detect if it's open or not: you'd want to try to blow out that part especially. If you still have problems leave a ...
Question about Brother MFC Office Equipment & Supplies
...fuser!!) 3. Locate the thin piece of plastic that runs from the centre to the right hand side. This bar is the problem 4. 3/4 along the right hand side, there is a sticky out bit on this bar ...
...door open/close cover. The mentioned "two blue tabs" are the release point of the fuser upper roller that you toggle to move the roller up or release the downward pressure from the bottom roller. ...
Question about Brother MFC Office Equipment & Supplies
...door and place the toner. This might solve the problem. You can also try to soft reset the printer. If none of these works, you might have to change the thermistor. Error 77 means that the fuser unit ...
Question about Brother MFC Office Equipment & Supplies
...fuser cover back up and closed the back door and my printer works. THANK-YOU thank-you! thank-you a zillion. (P.S. I tried to attach a photo but had problems with that. . . ) I went to brother typed ...
Question about Brother MFC Office Equipment & Supplies
...fuser. Both are near the center of the paper path. Look for a black plastic lever sticking out of a slot. They snap into their pivots, and if you pull a jam out backwards, they might stab through the ...
fuser door open? how do i close fuser door? Try fuser door should be in the back. If it is close, it could be a door sensor issue. Also make sure that the fuser is in correctly.
Question about Ricoh Office Equipment & Supplies
...fuser door open error getting "fuser door open" message. opened and reclosed fuser door to make sure fuser door was closed. restarted printer. still get same message. what can i do next? There is a ...
...fuser cover, which is at the back of the printer. Open the door and make sure there is nothing blocking the door from closing. Close the door and the problem "should" disappear. If it doesn't, it ...
36 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions