Question about Brother HL Office Equipment & Supplies
printed portion can you see the spots..if not.....than its your fusser unit thats marking the paper....remove the half printed paper slowly.....not to tear it......remover the fusser unit(hot unit)...
Question about Brother HL Office Equipment & Supplies
Why is there black spots on the edge of the paper when printing Everytime we print there is a black spot on each paper...how do we fix this? Change drum or wiper blade
Question about Brother HL Office Equipment & Supplies
...3 1/2 inches apart down the left hand side of the paper I get these only when printing with color mode at auto Spots along left margin spaced vertically about 3 inches apart: Brother HL-4040CN ...
...printed sheet of paper over and the ink transfered to someplace inside. I now have spotted printing jobs. Not good at all. hi friend ur cardige have been damged u have to do this try to clean ur ...
Question about Brother HL Office Equipment & Supplies
I have a Brother HL-2040. The "paper light is on & won't print. The "paper" light is on and I can't get it to print. There is paper in the machine. This is a Brother HL-2040. Hi, Sounds like a ...
...printed. They run throughout the paper, generally in different spots on different papers though. Thanks in advance for any assistance. shivan, did you change the toner if it yes then open printer and ...
The pages are printing off center. There is a black section down the right side of the paper. It was printing fine, I went to change the paper and fix a paper jam and now it is printing to the left of
...spots for a jam are before a sheet completely leaves the paper tray, anywhere between the feed tray and print carriage or between the print carriage and output tray. 3. Take off the front paper tray ...
...spots for a jam are the paper tray, anywhere between the feed tray and the print carriage, or between the print carriage and the output tray. 3. Step 3 Take off the front paper tray if the sheet got ...
Question about Brother HL Office Equipment & Supplies
KNOCKING SOUND AT WARM-UP AND DURING PRINTING. DIRTY SMUDGES ON PAPER. I CLEANED ROLLERS I COULD FIND, BUT PROBLEM PERSISTS sounds like you may have a flat spot on fuser pressure roller causing a ...
1,323 questions posted
Usually answered in minutes!
495 Questions
422 Questions
377 Questions
249 Questions
188 Questions