Brother HL-2040 Laser Printer "fuser unit" Questions

fuser unit hl-5350Dn The fuser unit is located at the rear side of the printer. Fuser unit error indicates one/more of the following. 1. The fuser roller/film life is over. Replace with new one 2. The

...fuser unit faliure the printer indicates fuser unit failer I have 2 printers that dosn´t work. Brother HL-5250 dn One with fuser that dosn´t work. Can I take thee fuser from the other and ...

Fuser Unit Hey there. :D My printer has a problem with paper jammed in the back fuser unit (you know, open the back cover, the cylindrical red thingy). The paper's tightly coiled around the fuser unit

fuser unit end". What is the problem for that printer HL-4040CN? Even after I changed the drum unit and belt unit, there are still 2 warnings appearing to ask for changing the belt and drum unit.

...fuser unit end How do i clear the message Thank you Look on page 115 under maintenence. Follow the instructions down to where it says Belt Unit, instead, find Fuser Unit then continue with reset ...

fuser unit failure is there any possibilities to fix the same fuser unit? Yes you can fix the same fuser but you will need advanced skills, this problem can be because you need to replace the upper ...

...for that, disassemble the fuser unit take out the fuser film and put some special high temp grease on the heating element, assembly all back and install, the other way is replacing the fuser ...

...Fuser Unit, which was damaged. So the paper was getting as far as the drum but the rollers to pull it through the Fuser Unit were not going round. A new Fuser Unit seems to be about £99 plus VAT ...

...Fuser unit failing within the printer. our company uses nothing but Brother printers and i have seen this error a few times. on very rare occasions its not the fuser and unplugging the power lead and ...