Question about Brother HL Office Equipment & Supplies
...cover and the 2 small side covers. In the left and right you will notice 2 screws that tighten the fuser. Remove these screws as well as the dataconnector on the right and the fuser lamp power supply ...
...fuser unit (you know, open the back cover, the cylindrical red thingy). The paper's tightly coiled around the fuser unit, and no matter how much I pull, the paper just won't come out. Is there a ...
...fuser cover. See below on how to open the fuser cover. Pull the tabs at the left and right hand sides toward you to open the fuser cover (1). Hint There are 2 kinds of covers at the rear of the ...
Question about Brother HL Office Equipment & Supplies
...Fuser cover is open Close the fuser cover located behind the back cover of the printer. Paper jam Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer does not start ...
Question about Brother HL Office Equipment & Supplies
...fuser cover. See below on how to open the fuser cover. Pull the tabs at the left and right hand sides toward you to open the fuser cover (1). Hint There are 2 kinds of covers at the rear of the ...
Question about Brother HL Office Equipment & Supplies
by pressing "cancel" and "reprint" at the same time. You will see all the various parts that can be reset in this menu, select the fuser. Thanks, Pat Try opening the front cover then pressing Go and +
Question about Brother HL Office Equipment & Supplies
...cover is removed. Press *** and pull the back left piece out while wiggling things around to get the 3 plastic pieces in the back to all come out. This exposes the fuser. Remove the two wire jack ...
...cover, the left side, and 3 plastic pieces in the back to get to the fuser. Then take out the fuser and find the 2 black wires that lead to the problem piece that needs to be cleaned. Here are the ...
Question about Brother HL Office Equipment & Supplies
...cover > Pull out the Tray completely > and once again check if you can see it or not, if so pull it out. Still it's not there? then install the tray and open the back door > pull the tab to ...
Question about Brother HL Office Equipment & Supplies
...cover of the fuser unit. Memory full - Press the go button. Print overrun - Press the go button. Clean drum unit - Clean the corona wire. Help me, please . Red status light on. PC recognises printer. ...
1,323 questions posted
Usually answered in minutes!
495 Questions
422 Questions
377 Questions
249 Questions
188 Questions
