Question about Brother HL Office Equipment & Supplies
...be able to find the way remove drum from the unit, then replace the new drum and fix it. Don not tough the edge wiper blade, rotate the drum and check whether it rotating smoothly in both
...fix this? Normally clearing the drum count the machine has to be on open front cover as if to change the drum press and hold the button in for about 10 second then release and shut the door. This ...
Question about Brother HL Office Equipment & Supplies
fix defective cleaner blade or bad drum Pages are black with toner, any way to fix this? I understand it is a defective drum or cleaner blade? if the cartridge is almost empty, then the toner start to
...end soon" signal on for about one month You will need to replace the Drum unit with a new one. To try to get it working for a short temporary fix, clean the Drum corona wire - might work, might ...
...fix it? Drum light flashing yellow means the drum is near it's end-of-life. There is some life left in the drum at this point. Do the following to get some more mileage out of your current drum and ...
...drum. To fix the problem, you have to remove the new drum and clean the contact terminals of the drum and the printer. Run the printer utilities such as cleaning and alignments and send a test print ...
Drum light is blinking and not sure how to change it or fix it in Brother HL-5250DN Hit the purple/blue button on the top of the printer 3 times. This will print a settings report of the printer ...
Can smears when priting be fixed When printing there are three dots on the left hand side of the paper and now there has been black smears with each print. I changed the printer cartridge to see if ...
Question about Brother HL Office Equipment & Supplies
...fix it Probably NOT the toner cartridge. More likely to be the drum cartridge. Pull out the toner/drum cartridge assembly and remove the toner cartridge from the drum unit. Now look carefully at the ...
Question about Brother HL Office Equipment & Supplies
...drum counter or will this fix the problem? When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps: Turn the printer power switch back on. ...
1,323 questions posted
Usually answered in minutes!
495 Questions
422 Questions
377 Questions
249 Questions
188 Questions