Brother HL-2040 Laser Printer "change print head" Questions

...print something, the paper gets stuck after about a 1/2 a page and all 4 lights begin to flash. I tried opening the door, turning it off, holding down the GO button, pushing it two times, pausing, ...

...change cartidge, but same problem. Please try to re align the print heads and service the carraige assembly of the printer ( Place where you slot in your cartridge). if it doesnt work then there is a ...

change to another computer when I installed my printer it does not print any docoments also when I print a test page it just will print the heading. I know it is not my computer because I have printed

...print head and changing the cartridge yellow still doesn't print, it sounds like there may be a problem with the print head or the board that controls the print head. The print head may not be ...

... Will not print plank pages,even after unclogging the heads. check print head and head cable............ If ink flow change mainboard, print head, and head cable. if ink not flow change only main ...

...press head nozzles on it ( bottom side ), dry it and then do the head cleaning. If dont help change print head, when print head is changed its also recomended to change absorber and purge unit

change cartridge after ink has dried Changing the ink cartridge is not the only problem, the print head will need to be changed as well. Inkjet printers need to be used frequently to prevent inkdrying

...change the print head and after changing a new print head, printer is not printing anything. It mans labels feeds but all blank. We have checked all the settings eg. Head Alignments, Heat, Pressure ...

...change the "Print head" power off the machine, remove the ribbion and plastic mask (lifts up) you will see 2 gold phillips head screws. unscrew them both and lift up the print head. push in new print ...

...print magenta and cyan. Change printer does not print magenta and cyan. Change of cartdridges does not help !! I have cleaned the printhead several times with isopropyl alcohol blow through. No help. ...