...opc belt' error displays 'no opc belt' on power up, tried a different belt and it says the same. Anyone got any ideas? Thanks You need to go into the settings and reset the counter once the new belt ...
...opc belt error would that have anything to do with it. Sorry, this sounds outside my experience. The only trigger for the 'illegal toner' message that I know is that the cartridge has the wrong plug ...
...OPC belt on MFC-9420CN using the menu? hl-2700" OPC Reset press GO and "+" at same time press "+" until OPC BELT appears press "SET" that will reset the counter on the expensive OPC. Since the ...
Question about Brother HL Office Equipment & Supplies
OPC belt is replaced and has 100% life but the OPC The printer has a message that there is no OPC belt but the OPC belt is present and has 100% life but the OPC belt message will not reset, even ...
...OPC BELT on MFC-9420cn I have a MFC-9420cn which had a print error. After fixing it it said to replace the OPC belt. I reset the opc belt and it then it said NO OPC Belt. I have swapped it out with ...
Question about Xante Office Equipment & Supplies
...opc belt in a xante colourlaser 1200 printer, it still say install opc belt. I clean printer and reinstall opc belt. It said to reinstall, I did that still give same message. I brought a new one and ...
...OPC belt How to reset "replace OPC belt" on a Lexmark X502n Here's the link on how to replace the Photodeveloper Cartridge on the Lexmark X500/X502: http://bit.ly/bzQQtH. Here's the link on how to ...
OPC Belt needs replacing How long is the life span of an OPC belt as this printer has only done 10,756 in its life? Try pressing 1 and 7 at the same time The LCD will show "OPC belt 1. Reset 2. Exit ...
Question about Brother HL Office Equipment & Supplies
...OPC Belt message stays on after replacing belt Message came up on LCD to replace the OPC belt.. nice 200-300 dollar cost btw. After replacing the cartridge with a new one the message still stays on ...
Question about Brother HL Office Equipment & Supplies
OPC belt has 78% left -cant rid the problem Printer working fine until this morning ... nothing changed just came up with this message ... bought OPC last December ... have tried turning off and on, ...
70 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions