Question about Brother MFC Office Equipment & Supplies
...or drivers? Hi there it may be the driver remove the printer driver then put it back in again it may work, an other thing is it the right driver for the windows you are using. All The Best ...
Windows to search & install the printer again - and this time it will be properly installed with the driver ( with the same printer name but with a "Copy 1) at the end. Now you can set this as the
Question about Brother MFC Office Equipment & Supplies
...Windows XP detects my card, but is unable to play sound through the sound card. 10. I'm unable to communicate on the network with my computer. my computer's IP address is 146.182.23.21. The network ...
...Windows 10. This started spontaneously. Printing half a page with an Inkjet machine is not normally a computer issue. So windows 10 would not normally have any effect on the printing for a printer ...
...windows comes back to the desktop, plug the printers USB cable back into your pc 8. Switch the printer on 9. A message should pop up on the pc screen stating that a new device has been found 10. IF ...
Question about Brother MFC Office Equipment & Supplies
...windows xp network configuration. 7. When the TCP Wizard window closes, it will take you back to Add Printer Wizard. Select "Have Disk" and navigate to the \USA\WXP\Addprt directory on your Brother ...
...Windows Vista, Mac OS 10 etc) if you then go to all downloads you will see the full software package for download. These are between 50 and 200MB in size so you may have to wait a while depending on ...
Question about Brother MFC Office Equipment & Supplies
...windows will appear one after another. Please DO NOT try to cancel or click on any options for the Found New Hardware Wizard. Just wait and the installation program will make the necessary selection ...
Question about Brother MFC Office Equipment & Supplies
...your os, maybe you must reinstall paperport http://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfc7840w_all choose Full Driver & Software Package for windows 8.1 64 or 32 ...
driver and do a nozzle and head alignment test. If you still have the same issue, try doing a hard reset - unplug the printer from power and PC, wait for about 10 minutes and replug everything and see
1,373 questions posted
Usually answered in minutes!
1,012 Questions
743 Questions
623 Questions
406 Questions
381 Questions