Question about Brother MFC Office Equipment & Supplies
reset MFC / DCP PRINTER SERIES 1.Remove the drum unit and toner cartridge. Wait 1 or 2 minutes. 2.Replace the drum unit and toner cartridge into printer. 3.The error message "Change Drum Soon/Drum end
...RESET Put the drum unit and toner cartridge assembly back in the machine. Do not close the front cover. Press Clear/Back. Replace Drum? a 1.Yes b 2.No Select ab & OK To confirm you are installing ...
...toner is good for about 5,000 pages while the drum unit is good for about 18,000 pages. The drum unit life indicator can be reset to get additional life from the drum unit. To do this, open the front ...
Question about Brother MFC Office Equipment & Supplies
...installing new toner and drum, did you reset the drum counter after replacing the new drum? Open the front cover and press the option button... then just select reset drum counter...and press
Question about Brother MFC Office Equipment & Supplies
...toner back to the machine, 6. Close the cover. If the display still shows drum error, go ahead and do the drum reset. 1. Open the front cover 2. Press the Options button on the control panel 3. The ...
...toner you may need to reset the drum life of the machine. This is how to reset the drum life: Open the front cover where the drum and toner are located. Press the clear/back key. Lcd should show ...
Question about Brother MFC Office Equipment & Supplies
...reset the drum count. Close the front cover.NoteBrother strongly recommends that customers do not use generic drum units and/or toner cartridges, or refill their Brother toner cartridge. Each Brother ...
Question about Brother MFC Office Equipment & Supplies
...reset "toner low" warning. Screen should say "accepted" when complete. I have the same problem. Exactly the same. This is my third cartridge. Previous ones worked fine. This one won't. Help! Nice ...
Question about Brother MFC Office Equipment & Supplies
...Reset the page drum count on Brother MFC-8860DN Open door remove drum and toner unit remove toner from drum push on blue tab on side to release reinsert new toner in drum reinsert unit in machine ...
Question about Brother MFC Office Equipment & Supplies
reset the toner low LCD message when you change toner cartridge? I believe you mean, DRUM Reset. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM -
1,373 questions posted
Usually answered in minutes!
1,012 Questions
743 Questions
623 Questions
406 Questions
381 Questions