Brother HL 5140 Laser Printer "replacing drum light" Questions

...replacing the drum unit, the Drum counter may not be reset. Reset the Drum counter as follows: Open the front cover. Locate the control panel button under the LED lights on the left side. Press the ...

...replacing the drum assembly. After replacing the drum, reset the drum counter: with the printer on and the drum light blinking, open the front cover and press and hold the GO button until all of the ...

...drum light on drum light is on it still prints but have light ink smudge marks on paper Have you already replaced the drum? If you have not replaced the drum that may be why you are getting smudges. ...

Drum light blinks 1. The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. 2. The Drum ...

Error light and Drum light are blinking. Do I Error light and Drum light are blinking. Do I need a new drum? Blinking says to replace drum soon, when it's on solid, it's time for a new drum...

...drum needed replacing or not. Is there any way to stop the light flashing. Should I be concerned? The drum light is triggered by a page counter. To reset it, hold the GO button with the drum door ...

Drum light flashing in spite of new drum unit and new toner cartridge common problem. The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality

drum light blinking The light blinking means it's almost used up, when it comes on solid it will stop printing. If your prints still look good you can open the front door and hold the go button til ...

...drum light comes on and printer stops The blue light is one and the drum light flashes. no printing. The error that you are giving me, is that the drum needs to be replaced. Replace the drum, and ...

...light up. Once all 4 LEDs are lit, release the Go button. Close the front cover. Reset the drum counter only when you replaced the drum unit with a new one. With power on, open the front door, hold ...