...blink every 5 seconds- TONER LOW (purchase more toner and have it ready when the 'toner empty' is indicated). If alarm light and data light stay lit- TONER EMPTY (replace toner cartrige with new
Toner light stays on My printer toner light will not go off even though I've put a new toner cartridge into it. I've shanken the new cartridge (and the old one) and still the toner light will not go ...
Toner light stays on!!! I hav etried all the solutions, including getting a new cartridge but to no avail. My toner light stays on!!! Open the toner door, then press and hold the 'Go' button till all ...
Question about Brother HL Office Equipment & Supplies
...toner light continues to stay on/won't print. I tried changing the drum and still the toner light stays on/won't print. I tried opening the toner door and holding down the 'Go' button to reset the ...
Question about Brother HL Office Equipment & Supplies
Toner light and Status light stays on I have just replaced a new toner cartridge, admittedly it is a compatable, but when I put it in the toner light stays yellow and the status light stays red and it
Question about Brother HL Office Equipment & Supplies
...TONER LIGHT STAYS ON CONTINUOUSLY TONER LIGHT STAYS ON ALL THE TIME SINCE TONER RAN OUT NEW ORIGINAL TONER IS NO DIFFERENT AND LIGHT STILL STAYS ON THANKS I had the same problem and Brother tech ...
Question about Brother HL Office Equipment & Supplies
Cannot print as only toner light stays on. All lights come on and then only toner light stays on. means you need a new cartridge is my best guess..
toner light came on and stayed on, so I replaced the tonor cartridge. Even with the new cartridge, the light stays on and nothing will print. You could try two ways. 1) reinstall the software. 2) push
toner light became red and stopped printing. I changed the toner, re-started the printer using the switch and and the go buttonto re- set. It won't print anymore. The Toner light stays on and it won't
...toner light stays on.........replace fuser or mpcb if the drum light stays on.........replace laser. if all the lights stay on.............mpcb. Any of the above solutions that fix the printer would ...
242 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions