Brother HL-2070N Laser Printer "remove toner streaks" Questions

...remove the toner and drum (can be messy) and use some canned air to clean the inside out. If you are still getting these streaks, it might be time to get a new drum (DR 400) as you are supposed to ...

remove each toner, open the frosted plastic flap below and slide the wiper back and forth about 10 times to clean the corona. You could also have a bad magenta cartridge which Brother will replace for

...toner wire. Once you clean off the wire and remove the lint or dust, it will not leave the streak. I know some more but that's enough for now. Good luck. You should clean ...

colour streak marks on the print out remove the toner and clean the surface of toner

Remove the cartridge and see if there is toner built un inside printer. Also look at the drum on the cartridge to see if it has black lines that line up with the pirnt defect you are seeing. Try a new

...it helps! Good Luck! CreativeTECH Mine did exactly the same thing, all I had to do was remove the yellow toner drum and slide the corona wire tab back and forth a few times. Fixed it completely.

toner cartrige was recently replaced with a refurbished cartridge. This is only the second cartridge. turn off printer, remove cartridge and drum and clean internally. reinstall drum and cartridge and

...remove the glass platen and clean the optics( mirror and lens with tissue and glass cleaner wen machine is not hot also insect expsoure lamp( do not touh lamps because the oil from your hands will ...

remove the toner cartridge, shake it gently, and replace it (this fix will only work for a short time). Usually there is a hinged door that swings down,exposing the cartridge so it can be replaced. On

...streaks are always in the same position the the drum is not holding the charge for the toner to attach to and therefore the drum is faulty and beeds to be replaced you need do follow steps: 1) take ...