...Drum LED goes ON and the Ready LED goes OFF. (8) Close the front cover. (9) Continue to press the control panel button. ✒ Check that the Data LED stays OFF. (10) Release the panel button. (11) ...
Question about Brother HL Office Equipment & Supplies
ready for when Toner life end is indicated. The Toner LED will turn on for 2 seconds and off for 3 seconds. 3) If the DRUM LED is blinking: Drum life end soon The drum unit is near the end of its life
Question about Brother HL Office Equipment & Supplies
...ready and alarm blinking : Paper Jam Clear the paper jam and press the panel button if the printer does not automatically resume printing. Misfeed: Re-install the paper and press the panel button. ...
...Drum, Paper and Ready). I also tried pressing "go" 8 times per the direction of a Brother representative over the phone. Any thoughts on how to troubleshoot my HL-2070n see my other post you need a ...
Question about Brother HL Office Equipment & Supplies
...drum unit out and put it back in, close the door When machine is in ready state press the go and up arrow button at the same time. Resets parts life will appear.Find drum life and execute. Good ...
drum, paper and the Ready light all blinking -> critical error found in self-test.) If the Ready light is off and the rest of the lights are steady, the toner is out, the corona wire needs cleaning
Question about Brother HL Office Equipment & Supplies
...drum and ready lights stay on, will not print. The drum light is yellow, and the ready light is green. They are not blinking. This printer has an on/off switch (on the left side near the bottom), and ...
...ready to replace the drum). Push the toner cartridge into the new drum until it locks into place; the blue lever should lift automatically. Put the assembly back in the printer. Clean the printer as ...
Question about Brother HL Office Equipment & Supplies
...ready light and the fan runs but it won't print... Yes Mr. Guest and Mr SwT, Replace the fuser assembly unit. Definitely the fuser got problem. This can be confirm by pressing the Go button and only ...
Put the drum unit and toner cartridge assembly back in the printer.Put the paper tray firmly back in the printer.Close the front cover. Make sure that the Paper LED is now off and the printer is ready
242 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions