...power to the degaussing coil. If you are careful, you can solder the legs back on but be careful not to heat the thermistor too much because it will crack in half if overheated with a soldering
...bad solder joint on the degaussing coil connector or thermistor next to it.If you`re handy with a soldering iron these connections would be near the a.c line input. good luck and don`t forget to ...
...iron slot mask that the in-line beams shoot through they have to have a de-gaussing coil. It is only on for a few seconds but without it you will have (dis)coloration of regions of the screen. The ...
...solder the legs back onto the thermistor, but they love to crack when heated with a soldering iron. Bring the broken one to your local TV shop and they will most certainly have many new ones in
thermistor switch..it is a device which is activated by a certain temperature,once it reach the max temp.it switch off..check whether it is soldered proerly on the pcb..use a soldering iron to fix it.
14 questions posted
Usually answered in minutes!
269 Questions
273 Questions
232 Questions
195 Questions
159 Questions