Zenith IQB50M90W 50" Rear Projection Television "cause picture tv show side" Questions

...picture blacking out randomly and the display just shows "Video 2" on the screen. If we jump on the floor or smack the side of the tv it will pop back on. Any ideas on what could cause this would be ...

...picture turn greenish pink after the TV has been on for a little while. What is the possible cause? These sets did have one common issue where red, green, or blue would do what you are describing.The ...

...TV is a straight black line. you said the picture is shifted to left. then the black line must be on right side only right?? it can be adjusted with the settings menu and try to fix the picture by ...

...watching. Smack your tv on the side while on see if the picture goes away or make a bright circle in the middel, this is caused by a bad solder joint but you wont get rid of the bunt pixels

...TV, the picture is fuzzy. After five minutes, the picture is clear but any words are out of focus even the menu for adjustments is out of focus. The convergence for red is clear but the convergence ...

...picture ], not across the entire tv screen. Here's what I mean. It only does it in [full screen] HD format,with the black bars on the side. [never wide screen HD format]. MITSUBISHI says the problem ...

...cause the screen to look dull, red/orange, etc. You may even see halos around images. Picture of a set that needs the fluid changed. TV set after fluid change SOLUTION You can get the correct parts, ...

PICTURE TUB-HOW DO I KNOW WHICH ONE CAUSE THERE ARE 3 RED BLUE GREEN? 2 CHANGE A P.W.BOARD ASSEMBLY-HOW DO I KNOW IF ITS THIS? 3 CHECK SOLDER OR CHANGE THE IC'S ON THE BLACK HEATSKINS AND/OR RESISTORS

...tv is showing the red green and blue ghosting on the pictures making them distorted ,they are all side by side, the colours sre all there but the picture looks as if its on three layers . 3D effect ...

...cause it to not recieve a picture as well.The cable company might have something to do with this. Also need to make sure that cable going in the tv is going in on the input side not output side. ...