light too dim.new bulb and also cleaned optics.increasing brightness doesnt help did you reset your lamp counter settings? maybe you forget to reset. just reset the lamp counter.
...light flashes on the top, then it turns to orange. I have replaced the bulb 2 times already and nothing helps. Did you cancell the bulb fault status in the main menu ie bulb hours when you changed ...
...light. The lamp must be replaced and the lamp timer reset before the projector will operate. To reset the lamp hour counter, press and hold the reset button, then press the menu/select button (while ...
Question about Sanyo Office Equipment & Supplies
...light bulb in the Sanyo pro traX multiverse projector unscrew the lamp door on the bottom of the projector, unscrew the lamp, remove the lamp, replace with new lamp, screw in, replace door, turn on, ...
Question about Optoma Office Equipment & Supplies
...still appears. This is second bulb i have replaced and warning message still appears You need to reset the light counter. Access through right most menu item. Then arrow down to lamp
...light comes on and no picture on screen. I thought the lamp may be blown so I replaced lamp...same problem. Can anyone help? The only way is to reset the bulb hours counter. There are instructions on ...
...lit up red when I plug it in and I just put a new bulb in did you reset the lamp hours counter ?? see the leaflet that came with the new lamp unit. It might be locked by the max hours of the
light Blinks on and off. The owner's manual should have a troubleshooting chart that will indicate what the blinking lights mean. If the new bulb did not clear it, the problem may be the ballast (part
Question about Sharp Office Equipment & Supplies
...light. The lamp indicator flashes for a while then it shuts down. Is there a reset button or something? Check your air filter, maybe it's all dusty and makes poor air cooling, and you need to reset ...
...light is on, but the projector is not on. IF you did not reset the lamp counter, the unit will shutdown. To reset, press the left and right arrows along with the power button for at least 3 seconds. ...
86 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
70 Questions
