Zenith D61W25 61" Rear Projection Television "wide vertical blue line tv" Questions

...vertical lines that go from top to bottom across the whole width of the tv about 1/4 inch wide. can still see the picture behind it. any idea what would cause this. Yes...your light engine/optical ...

Wide HD projection TV. The problem recently occurred where the picture appears to have lost part of its vertical hold. There is no abnormal picture movement but there are blue blurred lines across the

...wide screen TV Model kp57ws510 The TV is like I am seeing double, there are lines on the left and right side that are blue gray and red. Is this something I can repair or must I take it into a shop. ...

...vertical color lines about 3 inches wide. Can't access any commands from remote other than power button will turn off and on. Help. Larry use the advanced options page and reset the factor blue and ...

...vertical bar on the right edge of the screen (about 2" wide), and I'm getting a 3D effect with some images (shadowed images are blue). I checked the convergence and the cross hairs line up white, but ...

...Wide screen Digital Projection 61 inch TV Picture Greatly distorted all of a sudden by many yellow lines going across the top half of the picture dropping down in the center and up on each side. It ...

...wide horizontal line across my screen. It does not show up in the same place everytime. It is not a solid color just dimmer than the rest of the picture. The line is more noticeable on the regular ...

...vertical lines running across the screen. They increase in width from left to right, start at about 1" wide on left and get up to 4" wide as they approach midscreen, then disappear. Also there is an ...

vertical lines every inch or so from the top to the bottom of the screen. They're very, very narrow (about a "pixel" wide, if you will) and affect every input on the unit, including the DVI, component

...Wide. I can get the red and blue to adjust to most of the wacked green grid in that mode. But these are wavy green lines I'm adjusting to. I've ordered a couple IC's for the unit and will attempt a ...