...fan is low because of mechanical problems then the same problems can occur. Replacing the fan will solve the problem. If you wish to get some details; check the site linked here. Pull up older posts. ...
no power to fan infocus x2 fan no power test outside projector it run replace fan little power movement Hi there. Yes, this is a very common problem unfortunately. It is in the controller board, which
Infocus LP240 fan shuts off My infocus LP240 randomly comes up with an error that one of the fans has stopped and that it will power off shortly. I'm not sure if this is a mechanical problem or a ...
...problems. It has a new lamp on it and Im not sure what can be the problem? Thank you! hi, First of all check the lamp hour of your projector. Just reset it and try again. for resetting the lamp hour ...
Fan not working Just replaced the bulb and now our fan stopped working so the projector turns on and then after a minute it turns off. The fan never turns on. This suggests the bulb is not correctly ...
a minute or two then shuts down and the "Temp" light will flicker 4 or 5 times. I first thought the fan was out, but I can hear and feel the fan blowing on startup. I had the same problem and fixed it
...to what I can do to solve this problem? Thank you. hi, Possible problem is the faulty lamp cooling fan. Check the lamp cooling fan of your projector. maybe its has some problem.Do one thing, Remove ...
Question about InFocus Office Equipment & Supplies
InFocus 4800sp Over heats and fans only run slow and only if you start them by hand Everything is clean, pulled 4800sp apart and started it, had to start the fans by hand and they run slowly. Removed ...
I am getting a message on projector that fan stopped. what does that mean? hi, ur projectors lamp cooling fan have some problem. if the fan stopped the lamp will get over heated, that's why cooling ...
Question about PROJECTORS Office Equipment & Supplies
How to fix my fan fail error on my Acer X1161P projector? I have tested the fans and it seems like if it is a system problem, when it starts cooling down after the error they both start spinning... As
63 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions