Zenith R49W36 49" Rear Projection HDTV "led" Questions

...with Hitachi 50UX26B/27K 50 in. Rear Projection Television no picture only sound plenty of green led lights inside, 1 red led and a lot of dust on board, is this fixable and for how much, tha no ...

...sound. DP06 Protection 60SDX88B. No video, No sound. No lights on any of the CRT's. DP06 Protection LED is blinking on DEF. board. All five green LED's on DEF. board are dark. Voltage across all five ...

...by The three projectors are not lit Have a Hitachi 60SDX88B and does not turn on, front power red led is ON. Removed cover and check power supply led's (D919, D920, D928, D930 D971 all green are

...on My tv when powers on stays on for a split second and when took back cover off i found 5 green leds lit up but 1 green led did not lite up... then red led blinks on the board next to red led

Power LED blinks red When switched on, Power LED blinks green a few times, then I hear a click from the back, and then Power LED starts blinking red 4 times then brief pause then 3 times. The 4+3 red ...

50ux58b plug it in green leds power up & then go out when I plug the set in a series of green LEDs on main board power up then go out. bad power supply Working on a 60UX54B with identical problem ...

...a program and left the room for a minute but when I returned the screen was black and the power led and the light led were both flashing together. When attempting to turn off or on the power led ...

power led and lamp/program led blink stimultaneously. even after unpluging and let tv cool, still no picture have a 52" jvc rear projection. the power led and lamp/program led are blinking rapidly ...

...sources as well as the OSD, is is easy to determine if the problem is the Main Board or a defective LED/Driver. Enter the service menu and select CCA. Turn CCA OFF. Go to Sensor Status and select it. ...

...When the power button is pressed I could hear the fan for 30 seconds then it cuts off and The Power LED and Lamp LED are blinking rapidly simultaneously with a blank dark screen. From the manual... ...