InFocus ScreenPlay 777 Multimedia Projector "green color" Questions

color show green on black color Always check the cable first, a pinched wire or bent wire will cause color distortion. If the machine is discolored on startup (without inputs attached) its usually the

green and faces reproduce with green in them. I've tried adjusting the whites and it turns everything gray. Adjust the color temp, it worked for me. I had to turn mine off but now the color is perfect

are a correct sequence. Must be (from left to right). The piece whit out color, the pink piece, the green piece and the yellow piece. If the color wheel have more than four pieces, reapet the sequence

Try removing the cable, the green tint should disappear meaning that the color or lack of one of the primary colors blue/red/green were missing due to bad connection. or maybe you have a bad vga cable

color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for Video, Component and TV standard inputs (not valid for RGB and DVI digital). Using the Wall

...green or another color) is almost always a symptom of a bad or damaged cable - or a loos cable connection. In your case, you'll likely need a new M1 to VGA cable (Part# SP-DVI-A-R). Assuming that ...

...Works for a while if I turn it off/on again. Lamp about 2200h. Power indicator = green, temp/lamp = off. If your projector is the type that uses a color wheel, then the wheel may need to be

...color green instead of yellow on VGA not on S-Video I have tried the S-Video port and my yellow is yellow but useing the VGA the Yellow is Green. I have replace the cord, checked it out on other ...

the projector is displaying a green color whatever is displayed using the projector is displayed in like a green color Could be the color wheel or over-heating. Make sure the vents are all clear.

I've read, flashing colors could mean dust on the color wheel. Try removing the lamp and blowing air on the color wheel. Also if using the red,blue, green cables check to make sure the red is in tight