Question about Panasonic Office Equipment & Supplies
...3. computer input witch one light is flashing RED or illuminated RED with POWER BUTTON orange light. If LAMP INDICATOR light is illuminated RED than lamp runtime has reached 1800 hours. but projector ...
...flashing 3 red flashing is a lamp error, not the fans. the lamp has a problem striking. make sure it's pushed in and plugged in all the way. if the lamp is not that old, the power supply needs ...
...flashing. The lamp won't ignite, it shots down after trying to ignite, power led goes green and the lamp led flashes red 3 times, a pause on the red, then 3 more times, then a pause on red etc etc. ...
Question about NEC Office Equipment & Supplies
...replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then beeps about 3 times then turns to a flashing red. Help you need to reset the lamp ...
flashing 3 times I installed new lamp and I still do not get a screen/picture. It will blink green for about 60 plus times then turn red and the lamp/close light will flash green 3 times. Please help.
Question about ViewSonic Office Equipment & Supplies
...flashing red power and lamp lights. Any info would be greatly appreciated. I have the same problem as posted too, ordered 3 new lamps and they all still do the same thing. I`m starting to think its ...
Question about Casio Office Equipment & Supplies
red but projector/lamp does not operate, whats the problem? replaced the lamp Perform a Factory Reset: 1) Plug unit into AC power, so that all the lights come on as mentioned. 2) Press and hold "MENU"
...3. Red power light and flashing red lamp light (after power-down) I'm wondering if either the after-market replacement bulb is faulty (it looks ok), or if I've damaged some other component ...
Question about Epson Office Equipment & Supplies
...all 3 lights are flashing red you are out of luck. If it is under warranty call Epson. If your warranty has recently expired I would still call Epson. This is a "known issue" for this model
flashing .5 seconds on and .5 seconds off in 2 - 6 cycles the error is: 2 cycles - the projector is overheated. Move the projector to a cooler location, or/and remove dust in the light path. 3 cycles
81 questions posted
Usually answered in minutes!
400 Questions
218 Questions
80 Questions
76 Questions
70 Questions
