...lamp won't light up. Remote doesn't work except for power-on/off and laser. On power-up, lamp lights for 5 seconds then shuts off and lamp LED indicator lights up red. After cool-down and shut-off, ...
Question about Panasonic Office Equipment & Supplies
lamp light i just replace the lamp, and don't have any light coming from lens,starting green (after a few seconds,green become to flash), then turning on orange and lamp light flashing...please i need
...lamp light comes on, but no fan, no light, color wheel does not spin. Check that you replaced the lamp in the right way, and also that the unit is well reassembled, you may also need to reset lamp ...
Question about Panasonic Office Equipment & Supplies
...light. If LAMP INDICATOR light is illuminated RED than lamp runtime has reached 1800 hours. but projector still working. If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal ...
Question about Panasonic Office Equipment & Supplies
...light is coming out of lamp, system shuts down, then you see red! how to determine: pull the lamp out of the unit's compartment. Inspect lamp: bloated stem? shuttered? reflector is not shiny? ...
Question about NEC Office Equipment & Supplies
...lamp red light plus the system still will not power up also will not reset the lamp red light. the two 2 red lights displayed are Power and Lamp. I run the system with no lamp but all this did was ...
Question about Hitachi Office Equipment & Supplies
...not reset-no manual Pressed reset could not get rid of screen. Power & lamp light flashing Now switch power on , power & lamp lights on ,no screen, Fans appear to work normally how to change the ...
...light orange, the lamp lights stays off. I have tested everything fans are working and LAMP is secure, I had the exact same problem and solved it. After calling NEC tech and getting no help, my son ...
Question about Panasonic Office Equipment & Supplies
...light and lamp light. Temporay resolution: I reseat the lamp (remove and reinstall) and the projector works fine for a day or two then the same issue happens. I have cleaned the air filter so I am ...
...Lamp light came on. I took the old bulb out but couldn't see anything wrong with it. After ordering a new bulb and installing it the Bad Lamp light still comes on and the projector doesn't work. ...
26 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions