Bose 901 VI Main / Stereo Speaker "hook amp tape" Questions

...amp has auxilary at the back.then hook up devices to the equalizer. hook up red and white wires to equalizer output and the other end to amp aux red and white holes at the back of the amp then turn ...

...amp hook rec out to the input on eq hook output on eq to playback on tape mon. with seperates hook pre amp out to input on eq, output on eq to power amp input. The use of 901's in any digital AV ...

...amp in with metal jumpers connecting them for the main or front channels. that would be the best place to hook up the EQ on a AV receiver. If your receiver doesn't have pre out, power in jacks , you ...

...hook up my receiver to my Kenwood 7030 equalizer 1st, does the Sony have a dedicated subwoofer connection on the rear panel? 2nd, EQ's normally go in the INPUT and OUTPUT loops of a stereo receiver ...

hook theme up? The presence of 1/4" TRS balanced phone jacks instead of RCA inputs is a problem; and the 1/4" TRS speaker output jacks, too. You'll need to acquire cables with compatible ends. The amp

...hook bare speaker wires to back of amp to Bose speakers. You should have full use of Bose controls. The Monitor button is for an extra component that can be hooked up on the back, right side of ...

...hook it up to my Sony Receiver ? The use of 901's in any digital AV receiver setup for anything EXCEPT STEREO listening through the 901's alone requires you to have a separate amplifier for them and ...

...hook up to onkyo tx sr 875 I wrote most of this for a different receiver, but if you account for minor differences to your receiver this will work just fine. There's good news and bad news. The bad ...

...from your amp. usually normal audio cables work. or if you have no sound on your stereo from the tv. you must have cables hooked up wrong or your amp is on the wrong selector eg. tuner,tape,dvd,cd. ...

...have to send the amp section back to Velodyne for repair. If you do send the amp back, use some masking tape and mark the speaker leads. Hooking these back up wrong will blow the driver and the