Kodak Ektagraphic III-E-Plus 35mm 140 Slides Rotary Carousel, 80 Slides Rotary Carousel Slide Projector "slide projector carousel wont" Questions

...carousel to move on my kodak 760 it makes a noise when I push the buttons but it wont move how can I fix it Hi - I buy and sell these projectors all the time, but don't know this one - is it similar ...

...slide projector wont stop advancing unless i unplug it You are experiencing a fairly common problem called continuous cycling. It is caused by use or mis-adjustment. If you feel comfortable with a ...

...Slide Projector??  If so, the problem is the cycle solenoid link.  The link connects the cycle solenoid to the cycle lever.  It is made of plastic, and because of the age of your ...

...projector in front of the slide wont open when a slide is in ??? The shutter ("door" you refer to) should be spring loaded - the spring will snap the door open when a slide enters the gate. Usually, ...

...projector will not advance or reverse the slide tray. I can hear it try to move the tray but nothing happens. Bought a used 800carousel projector and it won't forward or reverse. Since I am doing a ...

the tray wont advance in foward or reverse also the remote will not work Please send an email to [email protected] I will send you both the user manual (to troubleshoot the issue) and the ...

...carousel 600 projector's fan thing wont work i was givin a projector from my science teacher and she keeps saying you can take it apart and see how it works, so i did and when i put it back together ...

...slide change mechanism. Turn the projector off. Remove the tray using the emergency release slot in the center hub of the projector. Turn the projector on and cycle it a few times in reverse, then in ...

...Carousel projector you describe is approximately 50 years old. Parts are going to be very difficult to locate. The continuous cycle condition you describe is due to either the cycle contacts just ...

projector just keeps cycling through the slides and wont stop, why?it just keeps going... I just spent 20 minutes writing up the solution and because I wasn't logged in, it dumped my post! So, IF you ...