Kyocera KM-1505 Copier "fuser cover printer" Questions

...fuser-cable cover by releasing one tab on the cover, and then rotating the back of the cover toward the center of the printer. Disconnect two cables at the left, inside, of the printer Disconnect the ...

...fuser cover 04: Remove the fuser 05: Remove the new fuser from the packaging 06: Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and then insert the ...

...back cover ( two screws) 2-remove the top cover. 3- remove the cleaning pad cover and the pad, 4-take out two screws that hold fuser, 5-unplug fuser (two plugs, power and sensor plug) 6-remove ...

...fuser cable cover by releasing the tab on the cover, then rotate the back of the cover towards the centre of the printer 3 Remove the duplexer inlet guide by releasing the 2 tabs on the guide, hen ...

how do you change the fuser unit printer back cover remove & then 4 screw remove the fuser unit ,remove the printer side cover and disconnect the fuser connecter & pull the fuser unit slowly

...fuser change 1. remove the cover for the duplexing drawer below the fuser drawer. 2. extend the fuser drawer 3. remove the 3 front covers of the fuser drawer 4. remove the three black screws that ...

...fuser-cable cover by releasing one tab on the cover, and then rotating the back of the cover toward the center of the printer. 3. Remove the duplexer inlet guide by releasing two tabs on the guide, ...

...handles on the fuser. 4. Remove the old fuser from the printer. 5. Install the new fuser. 6. Close the top cover. ...

...cover 10 Remove the output tray by releasing the tabs. 11 Unplug the harness from the fuser motor 12 Open two (2) clips and remove one (1) clip to remove the fuser connector. 13 Unplug two (2) 3-pin ...

...cover, located near the green fuser gear, which hides the other fuser wires. Then unplug the two connectors shown below and free the yellow/white wire from its guide clasp. Now remove the four screws ...