Lexmark Wheelwriter 10 Series II Typewriter "print solenoid" Questions

...replace the solenoid. I assume that is what the problem is. Any help? If this is a Nakajima print head the print solenoid is on thr R. side of the head and the armatures crack and stop printing. ...

...print solenoid cap. We sell them for 20.00 includes shipping and instructions. DickyO Cleveland Business Machines 216-241-0027 I measure 3.3 Ohms on the solenoid and about 2.4 volts when typing. ...

...print solenoid cap may be cracked. You can try a Lexmark Brand #1380999 for hard to image paper. There are some circular plastic shims on the front side of the solenoid, remove one and it will print ...

...seated i the side frames, then gey a littlr WD40 on the front of the print solenoid. if these fail you probably need a print solenoid cap. They are available buy a little tricky to install. ...

...the carriage and take the solenoid out. The plastic print solenoid cap is probably broken. We sell them for 20.00 includes instructions and shipping. DickyO Cleveland Business Machines ...

...print solenoid is either gummy or the plastic cap on it is cracked. First try spraying some WD40 on the back side of the solenoid. It is located below the ribbon just inside of the left printer side ...

...print solenoid cap is broken but the solenoid may just be gummy. The sol. is just inside the L. printer side frame just L of the selection motor, just in front of and directly below the small blue ...

...print. The impact solenoid has a rubber cap on it that is worn out. This cap needs replaced and the impact mechanism adjusted. Try a little WD40 on the rear end of the print solenoid plunger. ...

...print solenoid is broken they are available but are a bit tricky to install. DickyO My IBM Wheelwriter III does not print the letters. I have replaced the ribbon but still no letters. Please help. ...

...print solenoid plunger cap is cracked or the plunger is gummy. Try a little WD40 on the front of the print solenoid plunger if that dosen't help the pad will need replaced. It is a little tricky. The ...